SHOWER FILTER

 
 

TECHNICAL DETAILS

  • Max. operating pressure ; 6 bar

  • Connection thread Inch : 1/2" AG

  • Pressure loss*, new filter at 800 l/h : 0.8 bar

  • Diameter filter : 49mm

  • Installation length filter : 161mm

  • Duration of use** per filter max. (weeks) : 4

  • Operating temperature (water), max. : max. 65 °C

  • Operating temperature, short-term, < 5min. : 80°C

  • Nominal flow, max. : 800 l/h

  • Retention rate : 0.02 μm

* Pressure loss increases with increasing operating time; The filter must be replaced if there is a high pressure loss, even if the specified service life has not yet been reached.

**Generally dependent on water quality; Sand, rust, lime particles, biofilm fragments and other cloudy substances can reduce the service life.

HOW IT WORKS

High protection against legionella and other bacteria. The B-SAFE-universal filter offers a high level of protection against legionella infection, which can occur through inhalation of aerosols containing legionella. Microorganisms are filtered out of the water through a dead-end hollow fiber microfiltration membrane with pore sizes of 0.02 μm. The filtration process takes place in the dead-end process without backwash.

B - SAFE

Highly efficient protection against legionella and bacteria

The B-SAFE hygiene filter is designed to add an extra layer of protection for consistent hygiene at the point of use. It can also serve as an immediate solution if the water distribution system is contaminated. This filter acts as a reliable barrier against infections from legionella, bacteria, and protozoa. B-Safe is especially effective in critical zones where vulnerable individuals need protection.